|
Curving Angles
Buffalo bending rolls (horizontal type) No. 1 machine capacity for
curving angle leg out: 3" x 3" x 3/8" with a minimum Dia. 24".
Curving angle leg in: 2 - 1/2" x 2- 1/2" x 3/8" with a minimum Dia.
30"
back to
top |
|
 |
|
 |
|
Azon Thermal Barrier
Azon SU-207
polyurethane is a high strength polymer with thermal barrier
properties similar to wood. For best results, pouring and
debridging is recommended after painting or anodizing of the
aluminum extrusion. PSSI has the capabilities of pouring lengths
9'-0" to 30'-0", and
debridging continuously or skip debridging.
back to
top |
|
|
Hydraulic 90 Ton Brake
Press
PSSI can meet all your flashing requirements; down spouts,
industrial gutters up to 10' capacity on aluminum, galvanized and
stainless steel.
back to
top |
|
 |
|
| |
|
Punching & Notching
With the capability up to 12 feet our Unipunch System can punch
multiple holes in seconds.
back to
top
|
|
|
Roll Forming
PSSI can roll form ½ inch corrugated sheets that are painted or
galvanized Gauges range from 18, 20, 22, 24, and 26.
back to
top |
|
 |
|
|
|
Shear
Capacity 3/16 inch steel 12 feet long.
back to top |
|
|
Welding
Mig and Tig welding can be done on aluminum, galvanized, mild
and stainless steel.
back to
top
|
|
|
|
|
|
Wygoma
Our Wygoma gang drills and miters 45 degrees up to 90 degrees
with a 2 saw 20 inch straight cutter.
back to top |
|
|
Mubea (HPSN 600) 66 Ton Ironworker
Shearing Capabilities
- 18" x 3/8" Mild Steel
90 Degree Angle - 5" x
5" x 3/8"
Hole Punching up to 1
- 1/16" thru 3/4" Mild Steel
back to top |
|
 |
|
